Energy Audit
Map how your facility uses energy and get a costed, payback-ranked savings plan.
Learn moreElectrical Safety
Electrical Safety Audit for Industrial and Commercial Buildings
An independent inspection of your electrical installation as per the CEA (MSES) Regulations, 2023. We find the faults behind fires, shocks and unplanned shutdowns, and hand you a priority-wise plan to fix them. The audit is never tied to an equipment sale.
- Chartered Electrical Safety Engineer in-house
- 1200+ audits across India
- Independent and vendor-neutral
Stage 1 · The mandate
Is an electrical safety audit mandatory in India?
For certain categories of consumers, yes. Below is how the mandate works:
-
Notified categories: mandatory
Under the CEA (MSES) Regulations, 2023, periodic electrical inspection and testing of installations is mandatory for certain categories of consumers.
-
Many DISCOMs: mandatory
Many state electricity boards and DISCOMs have made electrical safety audits mandatory above certain connected-load thresholds.
-
Who may conduct it
A Chartered Electrical Safety Engineer conducts the electrical safety inspection up to notified voltage, as per the CEA (MSES) Regulations, 2023. PowerTech has one in-house.
-
Everyone else: voluntary
No mandate applies. The case for an audit here is fire and shock risk, not a certificate.
Stage 2 · Your auditor
The engineer the regulations call for
The CEA (MSES) Regulations, 2023 name the qualification, not just the firm: a Chartered Electrical Safety Engineer conducts the electrical safety inspection up to notified voltage. PowerTech has one in-house.
-
Chartered Electrical Safety Engineer
Authorised under the CEA (MSES) Regulations, 2023
-
BEE Certified Energy Manager
Reg. EA-23066
-
FSAI Accredited Professional
Valid to 26 Feb 2027
-
Advance Diploma in Industrial Safety
First Class
Stage 2 · The credentials
An electrical safety audit company working across India
Certification is the audit's foundation: the regulations decide who may inspect, and the report is only as strong as the papers behind it.
Below are the credentials PowerTech brings to every electrical safety audit, and who stands behind each:
- 1200+
- Audits completed
- 2014
- Founded in Pune
- Pan-India
- Audit coverage
-
Chartered Electrical Safety Engineer
Authorised by
Govt. of Maharashtra
Under the CEA (MSES) Regulations, 2023
-
BEE Certified Energy Manager
Certified by
Bureau of Energy Efficiency
Reg. EA-23066
-
ETAP-licensed power-system studies
Validated by
OTI, ETAP's developer
Short Circuit, Arc Flash, Relay Co-ordination
-
FSAI Accredited Professional
Accredited by
FSAI
Valid to 26 Feb 2027
-
Advance Diploma in Industrial Safety
Awarded by
Maharashtra State Board of Technical Education
First Class
Certificates on record
Certificates open full-size in a new tab.
Stage 3 · The inspection
What an electrical safety audit covers
Industries and commercial buildings run on electricity all day. Faulty wiring, overloaded circuits, poor earthing or ageing switchgear can end in equipment failure, a fire, or a fatal accident at the workplace. Most of these faults stay invisible until something trips or burns.
An electrical safety audit is the systematic check that finds them first. As per the CEA (MSES) Regulations, 2023, auditors go through the installation from the incoming supply to the final distribution points. They compare its actual condition against what the regulations require. Every gap goes into a report with priority-wise corrective actions, each citing the CEA rule it answers to.
PowerTech is an electrical safety audit company based in Pune, with a presence in Mumbai and Nashik. Since 2014 we have completed 500+ electrical safety audits across India, with a Chartered Electrical Safety Engineer in-house. We stay independent throughout: we advise, we never sell you equipment.
Below are the checks at the core of every audit:
- Physical inspection of panels, cables, earthing and distribution, from the incoming supply to the final DB.
- Measurements with calibrated instruments, such as earth resistance and insulation resistance testers.
- A priority-wise list of gaps and corrective actions, each mapped to the relevant CEA regulation.
Stage 3 · The scope of work
The scope of work: eight systems we inspect
The scope is fixed before we start, so you know exactly what the team checks. If you are floating a tender, we quote against your scope of work too. Below are the systems an electrical safety audit typically covers:
-
Incoming supply and HT/LT panels
Panels, busbars, terminations and enclosures checked physically for condition, clearances and safe access, from the incoming supply onwards.
-
Cables and power distribution
Cable routing, trays, joints and distribution boards inspected down to the final load points, with loading checked against capacity.
-
Earthing system and earth pit testing
Earth pit resistance measured and the earthing network verified. A weak earth can turn a small fault into a shock hazard.
-
Thermography of panels and joints
A thermal imager scans panels, cables and joints under load. Hot spots show loose or overloaded connections before they fail.
-
Protection and switchgear review
Breakers, relays and protective devices checked for correct rating and coordination, so a fault trips where it should.
-
Lightning protection assessment
Lightning arrestors and bonding assessed against IEC 62305, along with the surge path to earth.
-
Arc flash analysis
Where the installation needs it, we run arc flash studies on ETAP-licensed software to quantify the risk at each panel.
-
Fire hazard and UPS checks
Wiring, overloads and equipment condition reviewed for fire risk, together with the UPS installations.
Stage 3 · The process
How the audit runs on your site
The same CEA-aligned process runs on every site, scaled to its size:
-
Pre-audit data collection
We collect the single line diagram, equipment list, previous inspection reports and the connected load and incident history. That sets the scope and plan for the site visit.
-
Physical audit on site
The team inspects incoming supply, HT and LT panels, cable trays, earth pits, DBs, UPS and lighting distribution, measuring with calibrated instruments. We measure, we do not guess.
-
Priority-wise report
Observations become a detailed report: the status of each system, the gaps and non-compliances, and corrective actions in priority order, each citing the CEA rule.
-
Compliance support
Act on the report yourself, or have us support the corrective work, as a turnkey project or as consultants.
Stage 4 · The report
Inside the electrical safety audit report
Every audit ends in the same document. Below is what it contains, section by section:
-
Status of each system
The as-found condition of every system inspected, from the incoming supply to the final DB.
-
Gaps and non-compliances
Where the installation falls short of what the regulations require, stated plainly.
-
Corrective actions, in priority order
What to fix first and why, so the worst risks get resolved before the cosmetic ones.
Each observation cites the CEA rule and its reference number
-
The basis for follow-up
The report is the working document for the corrective phase, whether you act on it yourself or with our support.
Where we audit
Electrical safety audits for every kind of facility
PowerTech audits industrial, commercial and residential sites. Below are the sectors we serve most:
-
Manufacturing plants
Steel, automobile and auto ancillary, food, pharma, FMCG, electronics and power. High continuous loads, audited from supply to DB level.
Request an audit -
Offices and IT parks
Multi-tenant buildings with complex installations, where public access makes electrical compliance critical.
Request an audit -
Hospitals, malls and schools
Public buildings where a wiring fault risks more than downtime. Long hours, high footfall, no room for error.
Request an audit -
Hotels and restaurants
Guest areas, kitchens and utilities checked without disturbing operations, from wiring to earthing.
Request an audit -
Housing societies
Common-area installations: main panels, external wiring, earthing and lighting.
Request an audit -
Data centres
Round-the-clock loads where a single electrical fault can take the whole floor down. Earthing and protection matter most.
Request an audit -
Homes
Home electrical safety checks for old wiring, shocks and tripping, sized for a house rather than a plant.
Request an audit
Keep exploring
Related services
Audits that pair well with an electrical safety review:
-
-
Fire Safety Audit
The audit Maharashtra law mandates for certain buildings, by a licensed auditor.
Learn more -
Energy Conservation Study
A practical, costed plan to cut consumption and hit your conservation targets.
Learn more
Show all 5 services Show fewer services
-
Arc Flash Study
The audit finds the fault. The study says how much energy it releases, and puts the number on a label at every panel.
See the arc flash study -
Power Quality Audit
The audit finds the fault in the installation. A power quality audit finds the load distorting the supply, from the failing capacitors to the penalty on the bill.
See the power quality audit
Electrical safety audit: FAQs
Straight answers to what facility teams usually ask:
What is an electrical safety audit?
An electrical safety audit is a systematic assessment of the electrical systems and equipment in a building or an industrial unit. As per the CEA (MSES) Regulations, 2023, auditors check the actual condition of the installation, from the incoming supply through panels, cables, earthing and lightning protection to the final distribution points. The goal is to find unsafe conditions and non-compliances, and list the corrective actions that bring the facility to a safe, compliant state.
Is an electrical safety audit mandatory in India?
For certain categories of consumers, yes. The CEA (MSES) Regulations, 2023 make periodic electrical inspection and testing of installations mandatory for those categories. Many state electricity boards and DISCOMs have also made audits mandatory above certain connected-load thresholds. For everyone else it is voluntary, and the reason to do it is to find fire and shock risks before they surface.
What is covered in the scope of work?
Incoming supply, HT and LT panels, cables, the earthing system, UPS, lightning protection, and power distribution down to the final load points at the DB. Earth pit testing, thermography of panels and joints, and arc flash analysis are included where the site needs them.
How long does an electrical safety audit take?
It depends on the size of the facility. A small commercial building takes about a day on site. Large industrial facilities take 3 to 5 days or more.
What does the audit report contain?
The status of each system, the gaps and non-compliances found, and corrective actions in priority order. Each observation cites what the regulation says along with its reference number. The report complies with the CEA (MSES) Regulations, 2023 and is accepted by state and central government bodies.
Who can conduct an electrical safety audit?
As per the CEA (MSES) Regulations, 2023, a Chartered Electrical Safety Engineer conducts the electrical safety inspection up to notified voltage. PowerTech has a Chartered Electrical Safety Engineer in-house, alongside BEE-certified auditors.
What does an electrical safety audit cost?
Cost depends on the type of facility, the connected load and the scope of work. PowerTech provides a customised scope and commercial terms once we have your facility details, with no obligation on your side.
Which standards do you follow?
Audits and reports follow CEA (MSES) Regulations, 2023, IEC 62305, NBCS 2026, IEEE 519-2022, IS 3043 and IS 732, applied as the site and scope require.
Why choose PowerTech for an electrical safety audit?
We have completed 500+ electrical safety audits across India since 2014, with a Chartered Electrical Safety Engineer in-house and BEE-certified auditors. Findings are measured with calibrated instruments, not assumed. And we are independent. No equipment sale sits behind the report.
Which areas do you cover?
PowerTech is headquartered in Pune, with a presence in Mumbai and Nashik. We deliver electrical safety audits pan-India, and the audit team travels to your site wherever it is.
Do you help fix what the audit finds?
Yes. We support the corrective actions as a turnkey project or as consulting support, case to case. The audit itself stays independent, so the findings are never shaped by the follow-on work.
Stage 5 · Get compliant
Book an electrical safety audit for your facility
Tell us about your facility and what is driving the enquiry, whether it is a compliance requirement, an insurer's ask, or a fault that worried you. Our team will come back with a scope and commercial terms. From there, the report's corrective actions map the route to a safe, compliant state, with our support if you want it.
- We call you back A short call about your facility, connected load and what you need from the audit.
- You get a scope A customised scope of work with commercial terms, based on your facility details.
- The audit runs Our team inspects and measures on site, from about a day for small buildings.
- Chartered Electrical Safety Engineer in-house
- Independent, vendor-neutral findings
- Reports accepted by state and central government bodies
Make an enquiry
No obligation, just a conversation about your site.